3-19mm Tempered Insulated/Laminated Building Glass for Curtain Wall
|FOB Price:||US $0.69-29.69 / Square Meter|
|Min. Order:||100 Square Meters|
|Min. Order||FOB Price|
|100 Square Meters||US $0.69-29.69/ Square Meter|
|Payment Terms:||L/C, T/T, 30% Deposit at Least|
- Model NO.: Fro-81
- Appearance: Flat Tempered
- Thickness of Flat Tempered Glass: 3-19mm
- Technics: Physically Tempered
- Usage: Furniture, Dining Room
- Trademark: YaoHua glass
- Specification: 2, 300mm*5, 000mm, Customization
- HS Code: 70069100
- Shape: Flat and Curve
- Standard: ISO9001, CCC, Ce, Csi
- Fragment State: I
- Flatness: Conforming Article
- Shipment: Sea Shipment
- Transport Package: Safety Wooden Crates or Plywood Crates
- Origin: Anhui, China
Strength performance: Four times more than ordinary glass.
Heat stability performance: Three times more than ordinary glass, could bear the temperature change about 200° C.
Use high quality raw clear glass, visible light transmittance (%) from 4mm-19mm
Size tolerance : +/- 1mm , thickness tolerance : +/- 2mm
Customerization is available on request.
Tempered glass sheet can be drilled, cut, laminated, and insulated.
Standard: EN 12150; ASTM 1048; BS 6206: 1918; GB 15763.2-2005; AS/NZS 208: 1996
What thickness of glass do I need for my project?
There are several different thicknesses of glass available. Each thickness has its own purpose.
3mm (1/8") is used in several applications. You'll see it used in most windows and cabinet doors. It comes in clear, bronze, grey, patterned, and mirrored. It used to be also called double diamond glass. 5mm (3/16") comes in the same options as 3mm.
With mirror in particular 5mm is often chosen over 3mm because of its strength and ability to have a large sheet without the reflection being distorted. 5mm glass is used for smaller glass table top covers as well.
Oftentimes 5mm gets passed over for 6mm (1/4") glass. It is only a little more expensive but has enough strength to be used for almost anything from table tops and shelves to glass partitions and railings. Because it's very common it comes in bronze, blue, grey and clear.
We can custom order your glass so that you can go thicker! There is 10mm (3/8") available which is most commonly used in our frameless shower doors. We often also see it used for table tops and shelving when someone wants extra strength or flare.
12mm (1/2") can also be used on the frameless shower doors although it is not as common. 12mm is often seen in frameless railing glass, table tops or raised bar tops.
15mm (5/8") and 19mm (3/4") are for people who just want to show off. You could dance the night away on this thicker glass and you wouldn't even hurt it. It is striking. We most often see it on table tops.
The thicker you go with glass the darker green the edge of it becomes. If you aren't a fan of the green edge there is a new kind of glass called Starfire. Starfire is made with a low-iron low-lead formula which gives it a crystal clear quality. Your edge is clear with a slight aqua tint to it. It is stunning for table tops, shelves or desk tops.
There are different types of glass if you need added strength or safety. Tempering glass multiplies its strength five times over. A common misperception about tempered glass is that it is unbreakable. Despite its increase in strength on the surface of the glass it, ironically, is more fragile than regular glass on the edges. If you hit regular glass hard enough on its edge you may chip it. Do this to tempered glass however and the whole thing would break into little cubes.
Laminated glass is another option if you're looking for safety and strength. This type of glass is what is used in windshields today. It is made up of two pieces of glass that are adhered together with a resin layer in the middle. One piece could break while the other stays in tact and the resin layer would hold everything together.
Tempered glass is made by heating flat glass to just below its softening temperature and suddenly chilling it with jets of cold air.It results the outer skins under powerful compressive stress and the interior with severe tensile stress. In consequence, the impact applied to the glass will be overcome by thecompressional stress on the surfaces to assure safety of use.
|Size||600*900mm, 914*1220mm, 1830*1220mm, 1830*2440mm, 3300*2140mm,|
3210*2250mm, 3300*2250mm, 3660*2134mm etc.
|Payment Terms||30% T/T in advance, and balance before shipment.|
|Packing||Wooden crates worthy for ocean and land carriage.|
Balustrade tempered galss is safety glass, which is widely used as window glass, door glass, curtain wall glass, fencing glass in buildings, hotels, curtain wall, etc.
Edge working options
Tempered Glass Equipments
1. Water jet machine, cutting tolerance +-0.1mm
2. Screen Printing Equipment
3. Single Straight-line Glass Edging Machine
4. Double Straight-line Glass Edging Machine
5. Round Glass Edging Machine
6. Glass Drilling Machine
7. Glass Tempering Furnace
8. Glass cutting line
*More than 12 years manufacturer and supplier experience
*Quick delivery of 15 days.
*Safety strong packing and loading
*Option processing clear, frosted, heat soaked, heat strengthened
*Edging: Flat edge, grind edge, polished edge, beveled edge and others.
1. Interlay paper between two sheets
2. Timber end caps
3. Iron/plastic belt for consolidation
4. Safety corner
Q: Can you do the production as customized?
A: Yes, we have a professional technique team, we could produce the glass depends on your requirements.
Q. What the your glass package ? Are they safe ?
Answer :Seaworthy strong plywood crates with paper interleave . The crates will be very strong and every loading worker has 12 years packed, loading and fixation crates with container experience. And we send the loading pictures for you after we loading .
Q. What is your payment term ?
Answer : Our payment term is T/T 30% in advance ,70% after get the copy of B/L .
If your glass quantity is less, we want to TT 100% . You can payment By T/T, L/C at sight.
Q. Can you supply a free samples ?
Answer: yes, if you want us to provide big size sample according to your requirements, you should pay the cost of production.If we make the deal,sample cost will be pay back.